| |
|
|
|
| |
 |
| Blow-Moulding Machine Single station continuous parison |
| These are continuous type machines with hydraulic clamping and shooting unit. Extruder output is controlled by AC Variable Speed Drives.
Suited for the production of pharmaceutical and cosmetic
bottles and containers for paint, milk, gum, ink,
motor/engine oil etc. Available in single and double
station configurations with single and multiple die
heads for optimum production of wide range of
containers. |
| ....more product information |
| |
|
|
| |
|
|
|
| |
 |
| Blow-Moulding Machine
Double Station continuous Parison |
| These are continuous type machines with hydraulic clamping and shooting unit. Extruder output is controlled by AC Variable Speed Drives. The compact size of the machine is an advantage for the machine is an advantage for the small units.
Available in single and double station configurations
with single and multiple die heads for optimum
production of wide range of containers. |
| ....more product information |
| |
|
|
| |
|
|
|
| |
 |
| Blow-Moulding Machine Lower series accumulator |
| Consistent repeatability of Parison thanks to the state-of-art
design of extruders and accumulator heads and precise temperature profile. These are accumulator type machines and suitable for mass production of a variety of quality plastic containers. |
| ....more product information |
| |
|
|
| |
|
|
|
| |
 |
| Blow-Moulding Machine Medium series accumulator |
| These accumulator type machines are suitable for a wide range of containers like heavy duty drums, and cans for industrial packaging, square and round jars for edible oil packaging, automobile items etc.
Consumes lower power for conversion, requires minimum
space and the simple operating procedure makes them
really versatile. |
| ....more product information |
| |
|
|
| |
|
|
|
| |
 |
| Blow-Moulding Machine Higher series accumulator |
| These are suitable for economical production of different Drums, Carboys, Liners for Tin Containers, petrol tanks IBCs' and other technical items. The 200 litre machine is a proven one of producing 200 liter 'L' Ring Barrels from HMHDPE, Motorised 'up & down' and 'to & fro' movements of the clamping unit make it suitable for a wide range of article moulds, Multi-Point Parison control system |
| ....more product information |
| |
|
|
| |
|
|
|
| |
 |
| Blow-Moulding Machine Double layer |
| These are double layered machines, which can use different combinations of raw materials. Ideally suited for 75% reprocessed material and 25% virgin material to get superior strength and quality in hazardous chemical packaging and as well as food packaging.
The machine has two extruders connected to FIFO
Accumulator head and the accumulated material in ejected
in the required ratio. |
| ....more product information |
| |
|
|
| |
|
next |
|
| |
|
|
|
